4-channel analogue input
Current / voltage
µCAN.4.ai-BOX
The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen.
µCAN.4.ai-BOX: 24-bit measurement of analogue signals
Features
- Voltage +/- 10 V
- Current 0(4)…20 mA
- Accuracy 0.01 % (FS)
- Resolution 16-bit (1 mV / 1 µA)
- Resolution up to 24-bit (0,01 mV / 0,01 µA)
- Sampling rate 5ms / 200 Hz
- Galvanically isolated fieldbus
- Adjustable scaling
- Signal type freely configurable
- Protected against mechanical stress
- Fieldbus CAN
- Protocol CANopen / Raw CAN
Further designs
µCAN.1.ai-BOX
1-channel analogue input current / voltage
µCAN.1.ai-SNAP
1-channel analogue input current / voltage
µCAN.6.ai-SNAP
6-channel analogue input current / voltage
µCAN.4.ai-F1
4-channel analogue input current / voltage
µLAB.16.ai-19"
16-channel analogue input current / voltage
µCAN.1.ai-TRS
1-channel analogue input current / voltage
µCAN.2.ai-TRS
2-channel analogue input current / voltage
µCAN.1.ai-SENSOR
1-channel analogue input current / voltage
µCAN.2.ai-SENSOR
2-channel analogue input current / voltage
µCAN.1.ai-SNAP
1-channel analogue input current / voltage
µCAN.6.ai-SNAP
6-channel analogue input current / voltage
µCAN.1.ai-BOX
1-channel analogue input current / voltage
µCAN.4.ai-F1
4-channel analogue input current / voltage
µLAB.16.ai-19"
16-channel analogue input current / voltage
µCAN.1.ai-TRS
1-channel analogue input current / voltage
µCAN.1.ai-SENSOR
1-channel analogue input current / voltage
Ordering information
4-channel module for the acquisition of voltages +/- 10 V at 16-bit resolution with CANopen, designed for metric cable connectors. Signal wiring via screw terminals.
4-channel module for the acquisition of currents 0(4)...20 mA at 16-bit resolution with CANopen, designed for metric cable connectors. Signal wiring via screw terminals.
4-channel module for the acquisition of voltages +/- 10 V at 24-bit resolution with CANopen, designed for metric cable connectors. Signal wiring via screw terminals.
4-channel module for the acquisition of currents 0(4)...20 mA at 24-bit resolution with CANopen, designed for metric cable connectors. Signal wiring via screw terminals.
Downloads
Datasheet µCAN.4.ai-BOX
4-channel analogue input current / voltage
PDF [251 KB]
Manual µCAN.4.ai-BOX
4-channel analogue input current / voltage
PDF [1 .2 MB]
CANopen EDS file, voltage 16-bit
EDS [27 KB]
CANopen EDS file, voltage 24-bit
EDS [28 KB]
CANopen EDS file, current 16-bit
EDS [27 KB]
CANopen EDS file, current 24-bit
EDS [28 KB]
Order a Sample
Get a
sample module!
Any questions?
+49 2241 – 25 65 9 – 0
Write an email or call us.